LightAir IonFlow Guest Review
Welcome to the LightAir IonFlow Guest Review Giveaway
The lucky LightAir IonFlow Guest Review Giveaway winner will receive
a LightAir IonFlow 50 Style Air Purifier (ARV $353.92)!
LightAir develops products that combine efficiency, functionality, design, and ease of use to provide you with healthier indoor air quality. The LightAir IonFlow 50 offers an outstanding combination of efficient, silent, filter-free, ozone free, easy to use, energy efficient, and economical operation that’s at home in any environment. It’s a perfect balance between blending in and standing out. The clean lines, slim silhouette and transparency offers a stylish alternative to typical industrial-looking air purifiers. LightAir IonFlow 50 will nicely be a part of your home, hotel, office, restaurant, shop, school, clinic, and more.
The LightAir helps a growing number of people that are suffering from asthma, allergies, COPD, and many other health problems such as fatigue, headache, and concentration difficulties — which often stem from unhealthy indoor air quality. Small particles, below the size of 2.5 micron (PM2.5) and even below 1 micron, are inhaled deeply into our lungs, entering our blood stream bringing in other substances into our body. About 90% of the particles that are in the air are below 2.5 micron and they can become airborne for a very long time due to their size. These particles are the causes of heart and vascular disease, different forms of cancer as well as a serious aggravating factor that causes allergy and asthma reactions. LightAir effectively removes these particles from the air and is is efficient in removing the smallest particles that are considered to be the most hazardous to our health.
The LightAir IonFlow Guest Review Giveaway is courtesy of Elitemama.
Be sure to read through all the tabs for more details.
I‘ve been looking for an air purifier that’s efficient, uses less energy, is easy to use and also stylish. I’ve seen many air purifiers and none of them seemed to catch my interest. The models you find in the store are bulky, require filters (filters are a hassle and cost you money), unattractive, and don’t seem like they would do the job. I searched around the web and came across LightAir. I knew right away their products have everything I’m looking for. I received the LightAir IonFlow 50 Surface($395.00) for review.
About the IonFlow 50 Surface:
The IonFlow 50 Surface stylishly delivers cleaner and healthier air! It shares the same excellent performance and features as Style, Sky and Signature, efficiently eliminating the smallest and most powerful particles that cause the most severe health problems. Surface offers an unbeatable combination of efficient, silent, ozone free, energy saving, and easy to use, economical operation.
LightAir revolutionizes the the portable air purification industry by featuring technological functionality and sustainable manufacturing together with stylish design. The IonFlow 50 Surface is a great example of how you can combine manufacturing and style. With it’s transparent molded stand that’s approximately 4 inches / 10 centimeters shorter than the Style stands, it fits perfectly on a table, on your work desk, or even on the floor.
Product Specifications:
- Dimensions: 7.5X22 inches / 19×56 cm
- Weight: 5.7 lbs / 2.6 Kg (excluding adapter)
- Room size: approx. 540 sq ft / 50 m2
- Noise level: 5 dB
- Energy consumption: 7W
- Ozone level: 0 ppm, not even measurable (instrument measures down to 0,002 ppm)
- Certifications: EMC (Electromagnetic Quality) CE, ETL (US), GS, S, BSMI, CQC
- Particle reduction: Effectively removes particles (size 0.01-1.0?m. Especially efficient eliminating the smallest and most dangerous particles (nano particles below 0.1?m), but it also removes larger particles (1.0-25.0?m) at a reasonable rate.
- Negative ion effect: 250 000 negative ions/cm3 on 1 meter’s distance
- Decorative lights: Yes
- Protective guard: Yes
- Mounting: Floor/table
The IonFlow 50 Surface comes with:
- 1 Ion generator (above= 3 corona needles, below= outlet and metal hook)
- 1 collector
- 1 acrylic stand
- 1 switch
- 1 transformer
- 8 decorative lights (4 in the appliance and 4 extra)
- 1 protective guard (32 slats and 2 assembly rings)
- 1 corona needle brush
- Users Manual
- Product brochure
Assembling the protective guard for the IonFlow 50 Surface is very simple. This is the only piece that has to be assembled by hand. Everything else is pretty much one, two, three and you’re done. Be careful when assembling the protective guard. You don’t want to break any of the slots when you are putting in the rings. I didn’t have an issue when it came to putting the protective guard together, but it helps to be cautious and take your time. The protective guard is ready once the slots have been added to the rings .
The picture shows four decorative lights located in the generator. You have an extra set of lights if they burn out.
And now for the full simple assembly.
- Step 1: Have the acrylic stand and transformer ready. When it comes to the transformer, make sure the decorative lights are facing the floor and not the ceiling.
- Step 2: Place the transformer on top of the acrylic stand. The transformer should slide right on the stand. I gave it a little wiggle (holding the transformer) to make sure that it was in place.
- Step 3: Once you have the transformer and stand put together, take the protective guard and place it on the transformer. The transformer will fit through the rings of the protective guard. The guard will rest on the collector (the silver piece between the transformer and acrylic stand) and BAM! You’ve assembled the air purifier.
There’s just one more thing to do before you can try out the air purifier — get the power supply ready. Place the cord from the acrylic stand and the cord for the outlet into the switch. Now you’re ready for clean air!
I placed the air purifier in the living room since we spend the most time there. It’s best to keep the product at least 3 feet away from furniture and walls or they can get dirty.
Here is the IonFlow 50 Surface in the dark with the decorative lights on. The switch allows you to adjust the brightness of the light. One click of the switch allows normal lighting, two clicks of the switch allows double the lighting making it brighter and three clicks of the switch shuts the air purifier off. I find the lighting a great feature. This helps so that you can see the product at night so you don’taccidently bump into and end up hurting yourself or even breaking the product. Below is some information on how IonFlow 50 products work.
[The LightAir IonFlow Guest Review Giveaway has closed. Thanks to everyone who entered,
and congratulations to Julie M., the winner.]
The LightAir IonFlow Guest Review Giveaway is open to residents of the United States ages 18 and older and ends March 23rd at 11:59 pm Eastern Time. This is a group giveaway or creative presentation, meaning several blogs teamed up to promote it. If the giveaway form is marked DONE, you’ve already entered on another participating blog.
Good Luck!
Please contact the LightAir IonFlow Guest Review Giveaway host directly for quickest response with entry questions, problems, or other difficulties (e.g., follow or like doesn’t work).
All opinions expressed on this website come straight from The Lucky Ladybug unless otherwise noted. This post has a Compensation Level of 0. Please visit the Full Disclosure Policy page for more information.
137 Comments
Trackbacks/Pingbacks
- LightAir IonFlow 50 Giveaway (Ends 4/21) - The Lucky Ladybug - [...] the Elitemama LightAir IonFlow Guest Review for product assembly and how it works. The Surface and Style models are ...













10 Days Left
14 Days Left
19 Days Left
12 Days Left
7 Days Left
6 Days Left
12 Days Left
6 Days Left
9 Days Left 
that it covers 540 sq feet
I ;earned that the filter can be rinsed in water and reused and it works silently.
I like that it covers approximately 540sq. ft.
Nice purifier. I learned it effectively removes the smallest particles that cause the most severe health problems. Thanks for having this contest!
i learned that this product I have COPD and this would be an incredible win fgor meeffectively removes the smallest particles that cause the most severe health problems.
Particle reduction: Effectively removes particles (size 0.01-1.0 ?m). Especially efficient eliminating the smallest and most dangerous particles (nano particles below 0.1 µm), but it also removes larger particles (1.0-25.0 ?m) at a reasonable rate.
Thanks for the contest.